1998 Aprilia RS125

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Headlamp insecure (1.2.3b)

Offside Front Direction indicator insecure (1.5.3b)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

clutch dragging

front mudguard missing

n/s lower fairing insecure

switch gear on handle bars insecure

Centre Fairings insecure and likely to impede the steering (2.1.2e)

Drive chain sprocket carrier worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear shock absorber seal failed and leaking oil (2.4.A.1c) DANGEROUS

Drive chain excessively loose (6.2.1d)

Front Tyre has ply or cord exposed (4.1.2a(iii)

Rear Drive chain sprocket carrier worn to excess (6.2.1e)

Rear Rear suspension bush has excessive free play (2.4.A2a(i))

Rear Tyre has ply or cord exposed (4.1.2a(iii)

slight binding rear brake

Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Front Brake hose excessively chafed (3.2.B3a)

Front mudguard can easily contact the tyre (2.3.7)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too high (1.6)

Headlamp insecure (1.2.3b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Offside Rear Footrest missing (6.2.1a)

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Rear Stop lamp damaged and function impaired (1.3.3a)

Offside Front Handlebar mounting clamp bolt loose (2.1.1a) DANGEROUS

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Oil leak

side stand bracket loose

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Front wheel bearings have excessive free play (2.3.5b)

Front wheel spindle securing nut(s) loose (2.3.5a)

Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.2)

Headlamp insecure (1.2.3b)

Steering headbearing has excessive free play (2.2.2)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

body work insercure

chain link clip incorrectly fitted

lock nut missing swingarm spindle