2006 Mazda Bongo

Brake disc worn, pitted or scored, but not seriously weakened all discs (1.1.14 (a) (ii))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front all suspension items corroded

Front cross member corroded

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill but out of area (7.1.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Rear all suspension items corroded

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

Suspension component mounting repair covered in underseal inner and outer sills both sides (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Coil spring corroded all (5.3.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Lower Suspension component mounting prescribed area is corroded but not considered excessive panel but out of areas (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Sub-frame corroded but not seriously weakened both front and rear (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

all suspension components corroded

both inner and outer sills corroded or repaired

fuel pipes corroded

Horn not working (7.7 (a))

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Coil spring corroded all (5.3.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Lower Suspension component mounting prescribed area is corroded but not considered excessive panel but out of areas (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Sub-frame corroded but not seriously weakened both front and rear (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

all suspension components corroded

both inner and outer sills corroded or repaired

fuel pipes corroded

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Coil spring corroded all springs (5.3.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all underside (6.1.1 (c) (i))

all suspension components corroded

fuel pipes corroded

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Fluid leak harmful to the environment or a risk to other road users coolant (8.4.1 (a) (i))

Headlamp has a product on the lens so that the light output is severely reduced both sides (4.1.4 (b))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Coil spring corroded all springs (5.3.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all underside (6.1.1 (c) (i))

all suspension components corroded

fuel pipes corroded

Brake disc worn, pitted or scored, but not seriously weakened all discs (1.1.14 (a) (ii))

Coil spring corroded all springs (5.3.1 (b) (i))

Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all underside (6.1.1 (c) (i))

all suspension components corroded

fuel pipes corroded

Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened all discs (1.1.14 (a) (ii))

Coil spring corroded all springs (5.3.1 (b) (i))

Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all underside (6.1.1 (c) (i))

all suspension components corroded

fuel pipes corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Fuel Pipe/s corroded ()

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Horn not working (7.7 (a))

Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Fuel Pipe/s corroded ()

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component corroded but not seriously weakened radiator support (5.3.3 (b) (i))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Offside Headlamp are incorrectly positioned (4.1.4 (a))

Nearside rear brake fluctuating, but not excessively (3.7.B.3)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside rear brake fluctuating, but not excessively (3.7.B.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front Vehicle structure has slight damage (6.1.A.1)

Radius arm rubber bush deteriorated but not resulting in excessive movement bush housings to nearside and offside rear suspension arms closed up and rubbing on housing mounts (2.4.G.2)

Vehicle structure has slight corrosion corrosion in front and rear cross member sections to chassis (6.1.A.1)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Vehicle structure has slight damage (6.1.A.1)

Radius arm rubber bush deteriorated but not resulting in excessive movement bush housings to nearside and offside rear suspension arms closed up and rubbing on housing mounts (2.4.G.2)

Vehicle structure has slight corrosion corrosion in front and rear cross member sections to chassis (6.1.A.1)

BOTH OUTER SILLS DAMAGED BY JACKING , OFFSIDE FRONT CHASSIS MAIN LEG BENT , ALL COIL SPRINGS CORRODED , OFFSIDE REAR SUSPENSION ARM BUSH WORN AND ARM RUBBING SLIGHTLY ON HOUSING , EXHAUST CORRODED , ALL ADVISES ASSESSED TO BE OK AT TIME OF TEST

Nearside Front Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Side repeater not working (1.4.A.2c)

Offside Front Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

BOTH OUTER SILLS DAMAGED BY JACKING , OFFSIDE FRONT CHASSIS MAIN LEG BENT , ALL COIL SPRINGS CORRODED , OFFSIDE REAR SUSPENSION ARM BUSH WORN AND ARM RUBBING SLIGHTLY ON HOUSING , EXHAUST CORRODED , ALL ADVISES ASSESSED TO BE OK AT TIME OF TEST

Damage and corrosion to front crossmember

Exhaust system corroded

Inner sills corroded

coil spring corroded (2.4.C.1b)

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Damage and corrosion to front crossmember

Exhaust system corroded

Inner sills corroded

Off side wipper blade weak

coil spring corroded (2.4.C.1b)

Centre exhaust silencer deteriorated and slight blow

Front coil spring corroded (2.4.C.1b)

Front crossmember corroded and damaged

Off side and near side front inner sills corroded

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Inner Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Outer Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Inner Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear fog lamp tell tale not working (1.3.1b)

Centre exhaust silencer deteriorated and slight blow

Front coil spring corroded (2.4.C.1b)

Front crossmember corroded and damaged

Off side and near side front inner sills corroded

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front coil spring corroded (2.4.C.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Front coil spring corroded (2.4.C.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

unable to fully check under engine bay due to prtective shield fitted

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

unable to fully check under engine bay due to prtective shield fitted

An item not tested (Manual)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

offside front a.b.s sensor wiring insecure.