1998 Ldv Convoy

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Axle king pin has excessive play in pin and/or bush adversely affecting the steering (2.5.A.3a)

Offside Body insecure and dangerous to other road users (6.1.B.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

centre seat belt stalk button sticks

drivers seat pins worn

front exhaust bracket cracked

Body has a sharp edge caused by corrosion (6.1.C.1)

Emissions not tested (7.0)

Exhaust has a part missing (7.1.1a)

Front registration plate missing (6.3.1a)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Stub axle has excessive vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Rear registration plate missing (6.3.1a)

Registration plate lamp not working (1.1.5c)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear brake application uneven (3.7.B.2)

Brake master cylinder leaking hydraulic fluid (3.6.G.1f)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Obligatory mirror insecure (8.1.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear registration plate letter/figure incomplete (6.3.1c)

Seat belt locking mechanism does not secure or release (5.2.5a)

rear brake grabbing severely (3.7.A.5b)

Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)