1998 Rover 416

Emissions unable to be completed exhaust has a major leak (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement n/s/f and o/s/f (5.3.4 (a) (i))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Hydraulic brake calliper corroded but not seriously weakened (1.1.16 (d) (i))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Hydraulic brake calliper corroded but not seriously weakened (1.1.16 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Hydraulic brake calliper corroded but not seriously weakened (1.1.16 (d) (i))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both inner and outer sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive n/s/f and o/s/f inner wheel arches (5.3.6 (a) (i))

o/s/r trailing arm bush slightly deteriorated

oil sump corroded

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Fuel Pipe/s corroded ()

Nearside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Rear Bumper insecure (6.1.4 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Fuel Pipe/s corroded ()

Nearside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

all welding repairs hevaily under sealed

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Suspension component mounting repair covered in underseal all underbody (5.3.6 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Brake performance not tested (1.2.1 (g))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) DANGEROUS

Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

mild corrossion underside. advise waxoyl/ treatment to maintain current condition

Nearside Front engine mounting deteriorated resulting in excessive movement (6.1.D.1a)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

both rear tyre s getting low

nearside front tyre getting low tread

Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

both rear tyre s getting low

nearside front tyre getting low tread

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)