1998 Fiat Ducato

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive brake drum backing plate (1.1.21 (e) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive brake drum backing plate (1.1.21 (e) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Power steering pipe/hose slightly corroded various (2.1.5 (g) (i))

various areas of cab underside heavily coated with an underseal protection substance

Front Position lamp not working all (4.2.1 (a) (ii))

Horn not working (7.7 (a))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting underside of stepwell (6.2.2 (d) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Position lamp not working all (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Upper All outline marker lamps not working all (4.2.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive brake drum backing plate (1.1.21 (e) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (engine mounting) (6.2.2 (d) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive brake drum backing plates (1.1.21 (e) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Power steering pipe/hose slightly corroded various (2.1.5 (g) (i))

Brake pipe corroded, covered in grease or other material various (1.1.11 (c))

Exhaust mounting defective various rubber mounting/"o" rings perishing (6.1.2 (a))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))

Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear suspension air bellows perishing o/s and n/s

service brake efficiency just met over minimum limit at time of test

All direction indicators not working (4.4.1 (a) (ii))

Hazard warning lamps inoperative (4.4.1 (e))

Nearside Front Brake pipe excessively corroded pipe situated along side n/s/f chassis leg (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Suspension bellows leaking under inflated (5.3.5 (c))

Offside Front Upper Outline marker lamp not working (4.2.1 (a) (ii))

Offside Rear Rear fog lamp adversely affected by the operation of another lamp fog light illuminates whilst footbrake is applied (4.5.4 (b))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension unit leaking under inflated (5.3.5 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Exhaust has a minor leak of exhaust gases due to deterioration (6.1.2 (a))

Exhaust mounting defective various (6.1.2 (a))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis leg (6.2.2 (d) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Tyre slightly damaged/cracking or perishing o/s and n/s (5.2.3 (d) (ii))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front corrosion to o/s and n/s wheel hub assemblies

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Power steering pipe/hose slightly corroded hose ferrules corrosion (2.1.5 (g) (i))

Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive o/s and n/s brake drum backing plates (1.1.21 (e) (i))

Rear Suspension bellows damaged but not to excess o/s and n/s appear to be slightly under inflated (5.3.5 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced various areas to central n/s (6.1.1 (c) (i))

deterioration to areas of exhaust system

Hazard warning switch inoperative no tell tale method to indicate that hazards are operational whilst switch is to on postion (4.4.2 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush excessively worn bushes deteriorated (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Anti-roll bar linkage pin or bush excessively worn bushes deteriorated (5.3.4 (a) (i))

Offside Front Upper Position lamp not working (4.2.1 (a) (ii))

Offside Rear Upper Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front corrosion to o/s and n/s wheel hub assemblies

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Power steering pipe/hose slightly corroded hose ferrules corrosion (2.1.5 (g) (i))

Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive o/s and n/s brake drum backing plates (1.1.21 (e) (i))

Rear Suspension bellows damaged but not to excess o/s and n/s appear to be slightly under inflated (5.3.5 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced various areas to central n/s (6.1.1 (c) (i))

deterioration to areas of exhaust system

Exhaust has a minor leak of exhaust gases center box (6.1.2 (a))

Front crossmember corroded

vehicle undersealed through out

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength jacking point area (5.3.6 (a) (i))

Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Subframe mounting prescribed area is inadequately repaired jacking point area (5.3.6 (a) (i))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting area x2 (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting area (chassis) (5.3.6 (a) (i))

4 x exhaust rubbers missing

All welding repairs heavily covered in underseal

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a minor leak of exhaust gases center box (6.1.2 (a))

Front crossmember corroded

Nearside Front crossmember mounting area corroded and poor repair

Offside Front Outer outer sill has poor repair not fully welded

Offside Front crossmember mounting area corroded

underbody repairs covered in sealer

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front lower dorr step inner sills holed (6.1.1 (c) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point holed (6.1.1 (c) (i))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing rear of front wheel (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced main chassis to front crossnember holed (6.1.1 (c) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced main chassis rail centre of underbody (6.1.1 (c) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides rear of lower cab holed sill ends (6.1.1 (c) (i))

surface corrosion to under side front and rear

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))

Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Nearside Rear Registration plate lamp flickers when tapped lightly by hand (1.1.5e)

Nearside Rear Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Brake pipe slightly corroded (3.6.B.2c)