MOT Status
ExpiredMileage
60,984 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Front registration plate letter/figure incomplete (6.3.1c)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Fuel pipe/s corroded
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
nearside and offside front and offside rear tyre worn on inner edge
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside rear brake slightly binding
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside rear brake slightly binding
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Fuel pipe/s corroded
Brake pipe excessively corroded (3.6.B.2c)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Lower Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Lower Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Fuel pipe/s corroded
Fuel pipe/s corroded
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
BOTH front brake pads worn to about 25%
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
BOTH REAR INDICATORS GOING WHITE
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
How Reliable is the Rover 416?
Based on 648,418 MOT tests across 110,608 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R857 NPN is a 1997 Rover 416 in Blue with a 1,589cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 1997 Rover 416 models, the average MOT pass rate is 65.6% with a typical mileage of 78,603 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover 416 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 47,498 recorded failures. If you're considering buying R857 NPN, it's worth having these areas checked by a mechanic before committing.
The Rover 416 typically stays on UK roads for around 35 years. At 29 years old, this Rover 416 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R857 NPN?
You can check the full history of R857 NPN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R857 NPN registered?
R857 NPN is a 1997 Rover 416, first registered on 16 October 1997.
Is R857 NPN safe to buy?
The MOT history for R857 NPN shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R857 NPN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R857 NPN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.