1998 Piaggio PX200

Road spring corroded Offside rear corroding. (5.3.1 (b) (i))

Steering headbearing slightly stiff or notchy Slightly stiff. (2.2.2 (f) (i))

Exhaust corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Wheel corroded but not to excess (5.2.2 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Wheel corroded but not to excess (5.2.2 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brake excessively binding (1.2.1 (f))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Exhaust corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Wheel corroded but not to excess (5.2.2 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Wheel corroded but not to excess (5.2.2 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Central Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Road spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Exhaust slightly deteriorated (7.1.1a)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Headlamp insecure (1.2.3b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Throttle operating incorrectly (6.2.1f)

Horn not working (1.7.3a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

headlight glass cracked

speedo outer cable broken

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

headlight glass cracked

speedo outer cable broken

Floor brake test No brake control achieves an efficiency of 30%. (3.3.C1a)

Front Front wheel bearings have slight free play (2.3.5b)