1997 Mercedes-benz Vito

Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))

Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength susp mount to inner sill (5.3.6 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Outer Obligatory mirror does not provide a view to the rear (3.3 (c))

Offside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Offside Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake load sensing valve defective and function impaired seized (3.6.E.3)

Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Outer Steering rack gaiter split (2.2.D.2d)

Parking brake lever defective so that it cannot be satisfactorily operated (3.1.3c)

Parking brake lever releases when knocked (3.1.6a)

Parking brake: efficiency below requirements (3.7.B.7)

n/s handbrake low efficiency

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance lens broken showing white to rear (1.1.A.3d)

Nearside Seat belt anchorage prescribed area is excessively corroded chassis outrigger to inner sill joint (5.2.6)

Nearside Side repeater not working (1.4.A.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Side repeater not working (1.4.A.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive suspension arm mounting (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance lens broken (1.1.A.3d)

Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

brake pad warning light on

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Stop lamp not working (1.2.1b)

Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

brake pad warning light on

front exhaust mount broken

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Rear Brake pad(s) wearing thin (3.5.1g)

Trailer electrical socket damaged, but the lead can still be securely connected (1.9.3b)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear coil spring broken (2.4.C.1a)

Trailer electrical socket (13 pin) not operating the trailer lamps as intended (1.9.4)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Rear Brake pad(s) wearing thin (3.5.1g)

Trailer electrical socket damaged, but the lead can still be securely connected (1.9.3b)

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Offside rear light lens repaired.

Rear Brake pad(s) wearing thin (3.5.1g)

Rear windscreen is temporary type.

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Steering rack gaiter split (2.2.D.2d)

Offside rear light lens repaired.

Rear Brake pad(s) wearing thin (3.5.1g)

Rear windscreen is temporary type.

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Registration plate lamp not working (1.1.5c)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

pin-hole and slight loss of grease from near side outer driveshaft gaitor

Offside Rear Stop lamp not working (1.2.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)