MOT Status
ExpiredMileage
95,958 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
front brake application uneven (3.7.B.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
o/s + n/s front brake discs in very poor condition (causing imbalance) advise attention
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside front brake juddering severely (3.7.A.2b)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside front brake juddering severely (3.7.A.2b)
Offside rear brake juddering severely (3.7.A.5b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
front brake application uneven (3.7.B.2)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Rear wheel bearing rough when rotated (2.6.1)
Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Exhaust mounting missing (7.1.1b)
Brakes imbalanced across an axle (3.7.B.5b)
Front brake disc excessively pitted (3.5.1h)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear wheel bearing has excessive play (2.6.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Outer Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Headlamp aim too low (1.8)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R891 JWV is a 1998 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 10 MOT tests with a personal pass rate of 40%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying R891 JWV, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R891 JWV?
You can check the full history of R891 JWV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R891 JWV registered?
R891 JWV is a 1998 Ford Ka, first registered on 20 February 1998.
Is R891 JWV safe to buy?
The MOT history for R891 JWV shows 10 tests with a 40% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R891 JWV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R891 JWV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.