1998 Mercedes-benz Vito

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Lower Steering column universal joint has slight play (2.1.5)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit 2mm (4.1.E.1)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch and sill (2.4.A.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch and sill (2.4.A.3)

Offside Rear Shock absorber has slight corrosion to the casing and cover missing (2.7.2a)

Offside Rear light lens has be repaired with tape

clutch pedal rubber missing

engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

rear of van boarded out

surface corrosion to underside of vehicle

Nearside Front Side repeater incorrect colour lens cracked white light (1.4.A.2f)

Nearside Front front brake binding (3.7.B.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Side repeater incorrect colour lens missing (1.4.A.2f)

Nearside Windscreen wiper does not clear the windscreen effectively blade split (8.2.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen wiper does not clear the windscreen effectively blade split (8.2.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Lower Steering column universal joint has slight play (2.1.5)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit 2mm (4.1.E.1)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch and sill (2.4.A.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch and sill (2.4.A.3)

Offside Rear Shock absorber has slight corrosion to the casing and cover missing (2.7.2a)

Offside Rear light lens has be repaired with tape

clutch pedal rubber missing

engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

rear of van boarded out

surface corrosion to underside of vehicle

Nearside Stop lamp not working (1.2.1b)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Seat belt stitching slightly frayed (5.2.2b)

clutch pedal rubber missing

offside rear lens has been repaired with tape

rear of van boarded out

surface corrosion to underside of vehicle

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Seat belt stitching slightly frayed (5.2.2b)

clutch pedal rubber missing

offside rear lens has been repaired with tape

rear of van boarded out

surface corrosion to underside of vehicle

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

clutch pedal rubber missing

offside rear lens tape up no white light

rear of van boarded out

underneath of vehicle rusty

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Steering rack gaiter insecure (2.2.D.2d)

Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

clutch pedal rubber missing

offside rear lens tape up no white light

rear of van boarded out

underneath of vehicle rusty

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

clutch pedal rubber missing

rear of van boarded out

underneath of vehicle rusty

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear position lamp(s) has a product on the lens so it is not visible from a reasonable distance (1.1.A.3d)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

clutch pedal rubber missing

rear of van boarded out

underneath of vehicle rusty

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

clutch pedal rubber missing

rear of van boarded out

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Stop lamp not working (1.2.1b)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

clutch pedal rubber missing

rear of van boarded out

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)

clutch pedal rubber missing

front brake discs slightly worn

nearside inner constant velocity boot split

nearside rear tyre side wall perished no cords showing

rear of van boarded out

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)

clutch pedal rubber missing

front brake discs slightly worn

nearside inner constant velocity boot split

nearside rear tyre side wall perished no cords showing

rear of van boarded out

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

clutch pedel rubber missing

nearside inner constant velocity boot split

offside and nearside rear tyres side walls perished

rear of van boarded out

Nearside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

clutch pedel rubber missing

nearside inner constant velocity boot split

offside and nearside rear tyres side walls perished

rear of van boarded out

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake load sensing valve linkage stiff (3.6.E.3)

front brake juddering slightly (3.7.A.2b)

offside inner constant veloscity boot split

offside rear lens tape up no white light

rear of van boarded out

Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Steering rack gaiter split (2.2.D.2d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake load sensing valve linkage stiff (3.6.E.3)

front brake juddering slightly (3.7.A.2b)

offside inner constant veloscity boot split

offside rear lens tape up no white light

rear of van boarded out

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak

offside front inner constant velocity boot split

offside rear lens been tape up

rear of van been boarded out

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Rear rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

offside front inner constant velocity boot split

offside rear lens been tape up

rear of van been boarded out

Nearside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Offside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

clutch pedal rubber missing

offside inner costant velocity boot split

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Offside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

clutch pedal rubber missing

offside inner costant velocity boot split

same as last time number 643501306110

Front Windscreen wiper blade deteriorated (8.2.2)

Nearside Front Brake hose excessively chafed (3.6.B.4d)

offside front inner constant velocity joint boot split