1998 Ford Ka

Emissions not tested (7.0)

Nearside Headlamp aim too low (1.8)

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Power steering component(s) has slight seepage from a component (2.3.3b)

Steering column top bearing slightly worn (2.1.2c)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Front registration plate incorrect (6.3.1a)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Upper Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Registration plate lamp not working (1.1.C.1d)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)