1997 Mazda Bongo

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

slight corrosion to underside including suspension components

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

slight corrosion to underside including suspension components

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Power steering component leaking steering rack (2.1.5 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Inner Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake hose slightly deteriorated all (1.1.12 (b) (ii))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin both (1.1.13 (a) (ii))

corrosion to underside including suspension components

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

corrosion around the front crossmember/radiator support

suspension components corroded

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner sill slightly corroded (6.1.1 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

corrosion to all suspension components throughout underside

Offside Front Headlamp aim projected beam image is obviously incorrect power output obviously reduced (4.1.2 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner sill slightly corroded (6.1.1 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

corrosion to all suspension components throughout underside

Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Horn not working (1.6.2a)

Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is excessively corroded SILL AREA (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

engine bearing noise

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Power steering component(s) has slight seepage from a component (2.3.3b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)