MOT Status
ExpiredMileage
95,035 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
both rear tyres wearing / worn on edge
o/s/f tyre on wear markers
rear axel bush has slight play
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
corrosion 0o o/s n/s sills / floor to sills front floors and chassis
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
Body has a sharp edge caused by corrosion (6.1.C.1)
Driver's seat insecure (6.2.A.1)
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside rear brake recording little or no effort (3.7.B.5a)
Nearside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Offside Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Body has slight corrosion (6.1.B.2)
Nearside Front All position lamps not working (1.1.A.3b)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Stop lamp not working (1.2.1b)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Body has slight corrosion (6.1.B.2)
Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Headlamp aim too high (1.8)
Nearside Inner Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too low (1.8)
Offside Inner Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Spare wheel carrier insecure (6.4.2)
Front Tyre worn close to the legal limit (4.1.E.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Inner Front brake disc slightly pitted (3.5.1h)
lower coolant hose insecure
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Headlamp aim too high (1.8)
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b) DANGEROUS
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Front brake disc slightly pitted (3.5.1h)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R937 PCU is a 1998 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 50%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying R937 PCU, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R937 PCU?
You can check the full history of R937 PCU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R937 PCU registered?
R937 PCU is a 1998 Ford Ka, first registered on 11 March 1998.
Is R937 PCU safe to buy?
The MOT history for R937 PCU shows 14 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R937 PCU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R937 PCU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.