MOT Status
ExpiredMileage
183,926 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Body has a sharp edge caused by damage mirror glass (6.1.C.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength inner wheel arch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill and panel (2.4.A.3)
Centre Rear Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Nearside Front Inner Ball joint has slight play Steering arm (2.2.B.1f)
Nearside Rear inner wheel arch corroded
Offside Front Tyre worn close to the legal limit On limit now (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Rear Anti-roll bar linkage has slight play in a pin/bush Both sides (2.4.G.2)
Exhaust catalytic converter missing where one was fitted as standard (7.1.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust has a major leak of exhaust gases (7.1.2)
Front position lamp(s) not working Both sides (1.1.A.3b)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Centre Rear Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Nearside Front Inner Ball joint has slight play Steering arm (2.2.B.1f)
Offside Front Tyre worn close to the legal limit On limit now (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Rear Anti-roll bar linkage has slight play in a pin/bush Both sides (2.4.G.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front exhaust corroded
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front exhuast joint heavily corroded
rear exhaust (back box) clamp missing
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear coil spring corroded (2.4.C.1b)
rear exhaust clamp missing
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Offside rear brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear coil spring corroded (2.4.C.1b)
rear exhaust clamp missing
Fuel pipe/s corroded
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear coil spring corroded (2.4.C.1b)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
rear chassis corroded
Nearside Registration plate lamp not working (1.1.C.1d)
Offside rear brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Fuel pipe/s corroded
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear coil spring corroded (2.4.C.1b)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
rear chassis corroded
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
nearside rear tyre slightly worn on inner and outer
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside rear brake binding (3.7.B.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Rear Brake pad(s) wearing thin (3.5.1g)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
nearside rear tyre slightly worn on inner and outer
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear brake discs corroded
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear brake discs corroded
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear brake disc slightly pitted (3.5.1h)
Fuel pipe/s corroded
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Fuel pipe/s corroded
Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Headlamp aim too low and too far to the left. (1.8)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
slight distortion nearside rear brake hose
Offside Front front brake juddering slightly (3.7.A.2b)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Offside Front front brake juddering slightly (3.7.A.2b)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
park brake lever travel is extended
How Reliable is the Honda Integra?
Based on 52,340 MOT tests across 5,513 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R942 FMY is a 1998 Honda Integra in White with a 1,797cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 50%.
Across all 1998 Honda Integra models, the average MOT pass rate is 74.3% with a typical mileage of 97,458 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Integra fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,913 recorded failures. If you're considering buying R942 FMY, it's worth having these areas checked by a mechanic before committing.
The Honda Integra typically stays on UK roads for around 39 years. At 28 years old, this Honda Integra is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of R942 FMY?
You can check the full history of R942 FMY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R942 FMY registered?
R942 FMY is a 1998 Honda Integra, first registered on 6 March 1998.
Is R942 FMY safe to buy?
The MOT history for R942 FMY shows 22 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R942 FMY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R942 FMY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.