1997 Mazda MX-5

Nearside Front wing slight corrosion

Nearside Rear wheel arch slight corrosion

Offside Front wing slight corrosion

Offside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Registration plate inscription illegible (0.1 (b))

Horn not working (7.7 (a) (ii))

Indicator switch inoperative (4.4.2 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor within 30 cms of (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor within 30 cms of (7.1.1 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Indicator switch faulty (4.4.2 (a) (i))

Indicator switch insecure (4.4.2 (a) (i))

Nearside Front wing slight corrosion

Nearside Rear wheel arch slight corrosion

Offside Front wing slight corrosion

Offside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Windscreen wiper blade defective both (3.4 (b) (i))

Nearside Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Central Rear Rear fog lamp not working (4.5.1 (a) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

all shock absorber boot covers split

Nearside Rear Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

corrosion to all 4 suspension wish bones

corrosion to nearside plus off side inner sills

Emissions not tested (7.3.A.1)

Rear fog lamp not working (1.3.2b)

Registration plate lamp not working x2 (1.1.C.1d)

Nearside Rear Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

corrosion to all 4 suspension wish bones

corrosion to nearside plus off side inner sills

Front Exhaust has a minor leak of exhaust gases (7.1.2)

exhaust rattle

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Rear Rear fog lamp insecure (1.3.2a)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

exhaust rattle

Nearside Front front brake binding (3.7.B.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Headlamp insecure (1.7.3)

Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Nearside rear tyre pressure low and screw in the tyre

rear brake pads low

Brake pipe excessively corroded (3.6.B.2c)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nail in nearside rear tyre