1997 Rover 111

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Offside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Suspension system inoperative (5.3.5 (a)) DANGEROUS

Offside Rear Sub-frame fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Rear Suspension system inoperative (5.3.5 (a)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge below edge (5.2.3 (e))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive front and rear inner and outer (5.3.6 (a) (i))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge bald edge strong advise (5.2.3 (e))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Suspension component mounting prescribed area is corroded but not considered excessive front and rear inner and outer (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Outer Integral body structure is deformed but structural rigidity is not significantly reduced offside & nearside (6.1.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside inner & outer (7.1.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge below edge (5.2.3 (e))

Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge bald edge (5.2.3 (e))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside (7.1.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and rear offside & nearside (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge below edge (5.2.3 (e))

Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge bald edge (5.2.3 (e))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside (7.1.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and rear offside & nearside (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Front Direction indicator slightly discoloured offside & nearside (4.4.3 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge bald edge (5.2.3 (e))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside inner & outer (7.1.1 (a) (i))

Suspension component damaged but not seriously weakened stiff operation (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front & rear offside & nearside (5.3.6 (a) (i))

Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Sub-frame attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Exhaust mounting defective (6.1.2 (a))

Front Direction indicator slightly discoloured offside & nearside (4.4.3 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge bald edge (5.2.3 (e))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside inner & outer (7.1.1 (a) (i))

Suspension component damaged but not seriously weakened stiff operation (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front & rear offside & nearside (5.3.6 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge below edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside (7.1.1 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive front & rear (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front & rear (5.3.6 (a) (i))

Coolant leak

Exhaust mounting defective (6.1.2 (a))

Front Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement offside & nearside (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside (7.1.1 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength including bracket (5.3.6 (a) (i))

Nearside Rear Suspension unit leaking (5.3.5 (c))

Offside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Coolant leak

Exhaust mounting defective (6.1.2 (a))

Front Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement offside & nearside (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside (7.1.1 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive offside and nearside (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule offside and nearside (1.1.12 (f) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive offside and nearside (5.3.6 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement radius arm offside and nearside (5.3.4 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive offside and nearside (7.1.1 (a) (i))

Steering system lightly rubbing (2.1.4 (a))

Nearside Shock absorbers has negligible damping effect suspension height too low (5.3.2 (d))

Rear Service brake effort inadequate at a wheel both (1.2.1 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive offside and nearside (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule offside and nearside (1.1.12 (f) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive offside and nearside (5.3.6 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement radius arm offside and nearside (5.3.4 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive offside and nearside (7.1.1 (a) (i))

Steering system lightly rubbing (2.1.4 (a))

Coolant leak

Exhaust mounting defective deteriorated (6.1.2 (a))

Nearside Engine mounting damaged but not to excess (6.1.8 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Steering system lightly rubbing (2.1.4 (a))

Subframe mounting prescribed area is corroded but not considered excessive front offside & nearside (5.3.6 (a) (i))

Fuel system component leaking (6.1.3 (b) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner & outer (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Coolant leak

Exhaust mounting defective deteriorated (6.1.2 (a))

Nearside Engine mounting damaged but not to excess (6.1.8 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule offside & nearside (1.1.12 (f) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (5.3.6 (a) (i))

Steering system lightly rubbing (2.1.4 (a))

Subframe mounting prescribed area is corroded but not considered excessive front offside & nearside (5.3.6 (a) (i))

Fluid leak, but not excessive coolant (8.4.1 (a) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

outer plastic sill covers fitted to this vehicle

Front Direction indicator slightly discoloured both (1.4.A.2f)

Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)

Oil leak

Rear Brake hose has slight corrosion to ferrules offside & nearside (3.6.B.4e)

Rear Radius arm has slight play in a pin/bush offside & nearside more than slight (2.4.G.2)

Rear Sub-frame attachment slightly corroded offside & nearside (2.4.G.1)

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside Inner & outer (5.2.6)

Subframe mounting prescribed area is corroded but not considered excessive front & rear offside & nearside (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside front & rear (2.4.A.3)

brake only 50%

knock suspension

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

suspension heights low

Front Direction indicator slightly discoloured offside & nearside (1.4.A.2f)

Front Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside (2.4.A.3)

Nearside Rear brake slow

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Oil leak

Rear Brake hose has slight corrosion to ferrules offside & nearside (3.6.B.4e)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside (5.2.6)

knock suspension

Front Direction indicator slightly discoloured offside & nearside (1.4.A.2f)

Front Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside (2.4.A.3)

Nearside Rear Radius arm has excessive play in a pin/bearing more than slight / greased (2.4.G.2)

Nearside Rear brake slow

Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Oil leak

Rear Brake hose has slight corrosion to ferrules offside & nearside (3.6.B.4e)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Subframe mounting prescribed area is corroded but not considered excessive offside & nearside (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside (5.2.6)

knock suspension

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside (2.4.A.3)

Rear Radius arm has slight play in a pin/bush offside & nearside (2.4.G.2)

Rear Seat belt anchorage prescribed area is distorted but not considered excessive offside & nearside (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside (5.2.6)

slight knock from suspension

Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded floor pan (5.2.6)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded arch (5.2.6)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

slight knock from suspension

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive offside & nearside (2.4.A.3)

Rear Radius arm has slight play in a pin/bush offside & nearside (2.4.G.2)

Rear Seat belt anchorage prescribed area is distorted but not considered excessive offside & nearside (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive offside & nearside (5.2.6)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Offside Outer Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Oil leak

Outer Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

drivers seat worn

oil in water(coolant)

part of exhaust system deteriorated

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Offside Outer Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Oil leak

Outer Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

drivers seat worn

oil in water(coolant)

part of exhaust system deteriorated

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Inner Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Outer Rear Sub-frame attachment slightly corroded (2.4.G.1)

Nearside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)

Oil leak

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

exhaust system deteriorated

Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Inner Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Inner Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Outer Rear Sub-frame attachment slightly corroded (2.4.G.1)

Nearside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)

Oil leak

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

exhaust system deteriorated

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Oil leak

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

exhaust system deteriorated

Nearside Front Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Outer Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Oil leak

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

exhaust system deteriorated

Coolant leak

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Body has slight corrosion (6.1.B.2)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Body has slight corrosion (6.1.B.2)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Oil leak

front brake discs worn

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Oil leak

Coolant leak

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Body has slight corrosion (6.1.B.2)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Body has slight corrosion (6.1.B.2)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front brake discs worn

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake hose slightly deteriorated (3.6.B.4d)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Offside Trailing arm has slight play in a pin/bush (2.4.G.2)

Parking brake mechanism very stiff

Parking brake poor performance(19%)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear tyres perished

Tyre pressures

Wipers smearing windscreen

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Handbrake stiff in opperation

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Trailing arm has slight play in a pin bearing (2.4.G.2)

Nearside front tyre worn heavly on edge

Nearside rear wheel arch corroded

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Trailing arm has slight play in a pin bearing (2.4.G.2)

Oil leak

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear number plate faded

Rear tyres perished

Front brake hoses, ferrules corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside rear brake hose ferrules corroded

Oil leak

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Front brake hoses, ferrules corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside rear brake hose ferrules corroded

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Oil leak

Nearside Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Trailing arm has excessive play in a pin/bearing (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)

Oil leak

Nearside Rear Trailing arm has slight play in a pin bearing (2.4.G.2)

both front tyres worn on the inside edge

ferrules of all brake hoses showing some corrosion

left rear wheel arch corroded