1998 Nissan Almera

Brake pipe slightly corroded (3.6.B.2c)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front coil spring corroded (2.4.C.1b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Registration plate lamp not working (1.1.C.1d)

Oil leak

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear coil spring corroded (2.4.C.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front & rear all shock absorber dust cover split

Brake pipe slightly corroded (3.6.B.2c)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front coil spring corroded (2.4.C.1b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear coil spring corroded (2.4.C.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front & rear all shock absorber dust cover split

ALL SHOCK DUST BOOTS SPLIT

Brake pipe slightly corroded (3.6.B.2c)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front Body has a sharp edge caused by damage (6.1.C.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front registration plate deteriorated (6.3.1d)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

ALL SHOCK DUST BOOTS SPLIT

Brake pipe slightly corroded (3.6.B.2c)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Rear Brake hose excessively chafed (3.6.B.4d)

Offside Rear Upper Brake pipe excessively corroded (3.6.B.2c)