1997 Rover Mini

Central Rear Exhaust mounting defective (6.1.2 (a))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material front/rear at rear (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal floor pan/subframe mounting (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen washer not working (3.5 (a))

Brake pipe corroded, covered in grease or other material front/rear at rear (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal floor pan/subframe mounting (5.3.6 (a) (i))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front/rear at rear (1.1.11 (c))

Exhaust mounting defective missing front/pipe (6.1.2 (a))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Nearside Rear Subframe mounting repair covered in underseal floor pan (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))

Emissions not tested (8.2.1.2 (d))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Registration plate lamp not working (1.1.C.1d)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Side repeater not working (1.4.A.2c)

Offside Headlamp aim too high (1.8)

Offside Steering rack gaiter split (2.2.D.2d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

body and subframes rusty

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Rear Brakes imbalanced across an axle (3.7.B.5b)

body and subframes rusty

Nearside Front Steering rack gaiter deteriorated (2.2.D.2d)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Subframe mounting prescribed area modified, but not inappropriately (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

engine stabilizer bar badly worn

front discs worn

Advise bracket not present at exhaust front pipe ,system still secure.

Advise n/s screen washer poor.

Advise rear numberplate startedto seperate.

Nearside Front Headlamp aim too low (1.8)

Offside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Headlamp aim too high (1.8)

Offside Front Side repeater not working (1.4.A.2c)

Parking brake lever has little reserve travel (3.1.6b)

Advise bracket not present at exhaust front pipe ,system still secure.

Advise n/s screen washer poor.

Advise rear numberplate startedto seperate.

Offside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Parking brake lever has little reserve travel (3.1.6b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front wheel bearing has slight play (2.5.A.3c)