1998 Mazda Bongo

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear wheel arch corroded but not a Prescribed area

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear wheel arch corroded but not a Prescribed area

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Windscreen washer not working (3.5 (a))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front inner sill corroded but not a Prescribed area

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front inner sill corroded but not a Prescribed area

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front inner sill corroded but not a prescribed area

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Nearside Front inner sill corroded but not a prescribed area

Nearside Front Suspension component mounting prescribed area damaged but not considered excessive inner sill (5.3.6 (a) (i))

Front Windscreen washer not working (3.5 (a))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill section (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area damaged but not considered excessive inner sill (5.3.6 (a) (i))

Parking brake lever has little reserve travel (3.1.6b)

Rear brakes slightly uneven application.

Parking brake lever has little reserve travel (3.1.6b)

Rear brakes slightly uneven application.

Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake lever has little reserve travel (3.1.6b)

Temp fuel cap fitted

Centre Stop lamp not working (1.2.1b)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Stop lamp emits other than a steady red light lamp lens broken (1.2.1e)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Temp fuel cap fitted

o/s/r hub seal starting to leak

Engine covers fitted obscuring some components in the engine bay

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Under-trays fitted obscuring some underside components

centre stop light not working, assumed disconnected

slight oil leak from rear axle by near side drive shaft

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Rear fog lamp emits a light other than red (1.3.2e)

Windscreen washer provides insufficient washer liquid (8.2.3)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Under-trays fitted obscuring some underside components

centre stop light not working, assumed disconnected

slight oil leak from rear axle by near side drive shaft

Engine covers fitted obscuring some components in the engine bay

Nearside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Under-trays fitted obscuring some underside components

centre stop lamp not working, possibly disconnected

near side front, offside rear, near side rear tyres ars perishing but not exposing cords

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear fog lamp not working (1.3.2b)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Under-trays fitted obscuring some underside components

centre stop lamp not working, possibly disconnected

near side front, offside rear, near side rear tyres ars perishing but not exposing cords

Nearside Headlamp not working on dipped beam (1.7.5a)