1998 Honda VTR1000 F

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened small cracks started to appear (1.1.14 (a) (ii))

only 50% or rear light working

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Registration plate characters laid out in an incorrect format (6.3.4f)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

one rear light bulb not working

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Exhaust mounting deteriorated. (7.1.1.c)

Rear Exhaust noisy (7.1.2)

clutch fluid reservoir slightly fouling fairing on l/h steering lock, but not interfering with machine control

Nearside Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Nearside Front Direction indicator not working (1.5.1c)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Exhaust mounting deteriorated. (7.1.1.c)

Exhaust noisy (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

clutch fluid reservoir slightly fouling fairing, but not interfering with control of machine.