2005 Mazda Bongo

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D Bush (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D Bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering above axle (6.1.1 (c) (ii)) DANGEROUS

Rear Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))

Emissions not tested Coolant leak (8.2.2.2 (e))

Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Cross member (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x 2 (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Upper Macpherson strut attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material All rear (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust heat shield loose

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x3 (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Anti-roll bar linkage has slight play in a ball joint both (2.4.G.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Vehicle structure has slight corrosion inner arch (6.1.A.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Oil leak ()

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Anti-roll bar worn but not seriously weakened (2.4.G.1)

Nearside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Front position lamp(s) not working (1.1.A.3b)

Rear fog lamp not working (1.3.2b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)