2002 MG Zt

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Brake disc partially corroded on inner surface

Nearside Front Flexible brake hose secured with nylon ties.

Offside Front Brake disc partially corroded on inner surface

Offside Front Flexible brake hose secured with nylon ties.

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Brake disc partially corroded on inner surface

Nearside Front Flexible brake hose secured with nylon ties.

Offside Front Brake disc partially corroded on inner surface

Offside Front Flexible brake hose secured with nylon ties.

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Flexible hose secure to strut with nylon ties

Offside Front Flexible hose secure to strut with nylon ties

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Headlamp aim too high (1.8)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Parking brake lever has little reserve travel (3.1.6b)

brake warning light on

Emissions not tested (7.0)

Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Steering column will not lock in a fixed position (adjustable type) (2.1.2a)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

inbalance in rear parking brake

Registration plate lamp not working (1.1.5c)