2006 Audi A3

Front Lower Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Nearside Front BOTTOM OF WING HEAVILY CORRODED/DETACHED.

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Second bonnet catch stiff

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front BOTTOM OF WING HEAVILY CORRODED/DETACHED.

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Nail in tyre ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Second bonnet catch stiff

Manufactures engine and body covers fitted restricting full inspection

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Manufactures engine and body covers fitted restricting full inspection

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (front bush) (5.3.4 (a) (i))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Front Suspension arm corroded but not seriously weakened both sides have surface corrosion (5.3.3 (b) (i))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive floor has surface corrosion (5.3.6 (a) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Under-trays fitted obscuring some underside components

Nearside Front engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Brakes imbalanced across an axle (3.7.B.5b)

Electronic power steering warning lamp indicates a failure in the system (2.3.8)

Nearside Stop lamp not working (1.2.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside rear brake binding (3.7.B.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Stop lamp not working (1.2.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)