2008 Honda CBF600

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Valve stem seriously damaged (5.2.3 (j))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake disc worn, but not excessively On advisory limit (1.1.14 (a) (i))

Shock absorber has slight external damage to the casing Reduced damping in front forks (5.3.2 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Brake fittings not recommended for road use

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Nail in tyre

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Engine bolt loose (6.2.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Headlamp switch faulty Clutch lever interfering with pass switch (1.2.4) DANGEROUS

Brake fittings not recommended for road use

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Nail in tyre

Tyre tread depth is below minimum requirements of 1.0mm rear (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Floor brake test indicates a binding brake (3.3.C2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Throttle operating incorrectly (6.2.1f)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Rear Wheel has an excessively distorted bead rim. (4.2.2)

Headlamp aim too low (1.6)