2012 BMW 1 Series

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Play in steering rack inner joint(s)

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Suspension arm pin or bush excessively worn front (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Headlamp lens slightly defective CONDENSATION BUILD UP (4.1.1 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Front Bumper insecure (6.1.4 (a) (i))

Nearside Front Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Bumper likely to become detached (6.1.4 (a) (ii)) DANGEROUS

Nearside Front Outer Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Position lamp insecure (4.2.1 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Side repeater not working (1.4.A.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)