2009 Honda Accord

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Brake pipe excessively corroded Near flexi (1.1.11 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch near suspension mount (6.1.1 (c) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch near suspension mount (6.1.1 (c) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material Several pipes coated (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Undertray not fully secure (8.1.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Undertray not fully secure (8.1.1 (b) (i))

Exhaust has a major leak of exhaust gases around turbo and down back of engine (6.1.2 (a))

Nearside Rear Brake pipe excessively corroded chassis pipe at brake flexy (1.1.11 (c))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch has hole (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch has hole (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Road wheel slightly distorted dent,inner rim (5.2.2 (c) (i))

Nearside Rear Road wheel slightly distorted dent,inner rim (5.2.2 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge worn smooth,inner sholder + nic on inner sidewall,no cords (5.2.3 (e))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Hydraulic brake calliper leaking leaking at flex pipe at calliper (1.1.16 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Under-trays fitted obscuring some underside components

Nearside Rear Rear wheel bearing has excessive play (2.6.2) DANGEROUS

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)