2004 Honda Jazz

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Nearside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Fuel Pipe/s corroded x3 ()

general underbody surface corrosion

Registration plate lamp inoperative in the case of multiple lamps or light sources 1x (4.7.1 (b) (i))

Shock absorbers has slight external damage to the casing both front corroded. (5.3.2 (b))

Suspension component mounting prescribed area is corroded but not considered excessive rear boot floor inner sills heal board area. (5.3.6 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources 1x (4.7.1 (b) (i))

Shock absorbers has slight external damage to the casing both front corroded. (5.3.2 (b))

Suspension component mounting prescribed area is corroded but not considered excessive rear boot floor inner sills heal board area. (5.3.6 (a) (i))

Nearside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Offside Front Brake pipe excessively corroded under wing (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources 1x (4.7.1 (b) (i))

Shock absorbers has slight external damage to the casing both front corroded. (5.3.2 (b))

Suspension component mounting prescribed area is corroded but not considered excessive rear boot floor inner sills heal board area. (5.3.6 (a) (i))

under side of vehicle showing signs of corrosion

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

under side of vehicle showing signs of corrosion

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Headlamp aim projected beam image is obviously incorrect both sides. (4.1.2 (c))

Offside Front Suspension arm pin or bush excessively worn front arm rear bush. (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush starting to de-bond (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inside arch (5.3.6 (a) (i))

Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Fuel Pipe/s corroded ()

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Fuel Pipe/s corroded ()

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

rear wiper worn

Centre Stop lamp not working (1.2.1b)

Emissions not tested (7.3.A.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

rear wiper worn

Offside Stop lamp not working (1.2.1b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)