2004 Honda Jazz

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Front Macpherson strut ball joint has slight play (5.3.4 (a) (i))

Offside Rear Inner Tyre slightly damaged/cracking or perishing heavily (5.2.3 (d) (ii))

Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

black under sealant used

general underbody corrosion/ both sides inner and outer sills

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Nail in tyre

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened nearside/offside (1.1.14 (a) (ii))

Rear Coil spring corroded nearside/offside (5.3.1 (b) (i))

corrosion to underbody /inner/outer sills

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting by sub frame mounting (6.2.2 (d) (i))

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Brake pipe excessively corroded trailing arm (1.1.11 (c))

Offside Rear Brake pipe excessively damaged front to rear main (1.1.11 (c))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive cill (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive cill (5.3.6 (a) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

O /S F WISHBONE ARM BUSH STARTING TO SPLIT

SUSPENSION PARTS/BRAKE PIPES GETTING RUSTY IN PLACES

1/ FRONT BRAKE PADS GETTING LOW 2/ O/S/F WISHBONE ARM BUSH STARTING TO SPLIT 3/ BOTH FRONT TYRES WORN ON EDGES AND N/S/F GETTING CLOSE TO LIMITS

Offside Rear wheel bearing rough when rotated (2.6.1)

1/ FRONT BRAKE PADS GETTING LOW 2/ O/S/F WISHBONE ARM BUSH STARTING TO SPLIT 3/ BOTH FRONT TYRES WORN ON EDGES AND N/S/F GETTING CLOSE TO LIMITS

1/ BOTH FRONT TYRES WORN ON EDGES

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

1/ BOTH FRONT TYRES WORN ON EDGES

1/ FRONT BRAKE PADS GETTING LOW

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

1/ FRONT BRAKE PADS GETTING LOW

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)