2009 Ford Ka

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive Drive shaft seal (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Rear Coil spring mounting corroded but not seriously weakened Both (5.3.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Emissions unable to be completed (8.2.1.2 (d))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Exhaust emissions likely to be affected by an exhaust leak Needs to be re sealed (8.2.1.1 (b))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive Drive shaft seal (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Rear Coil spring mounting corroded but not seriously weakened Both (5.3.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security axle is corroded (6.2.2 (d) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on outer edge (5.2.3 (e))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear axle corroded

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone bush (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn wishbone bush (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone bush (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn on edges (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2mm worn inner edge (5.2.3 (e))

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear tyre starting to perish on outer walls

Offside Front Brake hose twisted (3.6.B.4c)

all 4 tyres starting to perish on outer walls

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)