2006 Seat Leon

Exhaust noisy (8.1.1 (a))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Rear Exhaust system insecure (6.1.2 (a))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge 205/55/16 (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 205/55/16 (5.2.3 (e))

parking brake lever has little reserve left

Nearside Front Tyre has light wear on inner edge only

Rear Suspension arm pin or bush worn but not resulting in excessive movement Both side rear arm inner bushes deteriorated (5.3.4 (a) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre has light wear on inner edge only

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Both side rear arm inner bushes deteriorated (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge Edge (5.2.3 (e))

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

exhaust back box corroded and in poor condition

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Engine covers fitted obscuring some components in the engine bay

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Under-trays fitted obscuring some underside components

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Engine covers fitted obscuring some components in the engine bay

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

borderline cracking & generally worn low in nearside rear tyre

nearside front tyre worn close to wear bars

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

borderline cracking & generally worn low in nearside rear tyre

nearside front tyre worn close to wear bars

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

e s p light on attention requiored

full under trays fitted& floor trays fitted

all disc slightly pitted

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

all disc slightly pitted

N/S & O/S Floor covers fitted