2004 Honda CBR125R

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Chain guard insecure (6.1.7 (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too high (4.1.2 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Clutch lever shortened (6.2.7 (b))

Drive chain slightly tight (6.1.7 (k) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Headlamp switch does not immediately illuminate all main beam headlamps (4.1.3 (a))

Offside Front indicator lens missing

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Offside Rear Direction indicator damaged but function not impaired (1.5.3a)

Front Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Nearside Rear Direction indicator damaged but function not impaired (1.5.3a)

Offside Rear Direction indicator damaged but function not impaired (1.5.3a)

Rear Chain guard missing ()

Rear Drive chain slightly loose (6.2.1d)

Front Wheel alignment slightly misaligned. (2.5.1)

Steering movement slightly 'notchy' (2.2.1a)

Brake performance not tested (3.3)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Headlamp aim too high (1.6)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Registration plate with character(s) which are not the correct height (6.3.4a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front tyre now starting to crack.

Drive chain excessively tight (6.2.1d)

Nearside Direction indicator not working (1.5.1c)

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b)

Nearside Rear Direction indicators flashing less than 60 times a minute (1.5.1c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii))