2006 Peugeot 107

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Parking brake operation is causing the vehicle to swerve to the nearside (1.4.1 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge also perished and damaged (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded (5.3.6 (a) (i))

Handbrake very high

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Hazard switch poor

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Horn not working (7.7 (a))

Hazard switch poor

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Brake pipe corroded, covered in grease or other material nearside front to rear (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Rear Inner Road wheel slightly distorted rim edge (5.2.2 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Road wheel slightly distorted inner bead (5.2.2 (c) (i))

Rear exhaust bracket has been repaired

Offside Rear Registration plate lamp not working (1.1.C.1d)

Rear exhaust bracket has been repaired

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front brake binding slightly

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front brake binding slightly

Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

n/s/f tyre getting low

n/s/f tyre getting low

Hazard switch has sticky operation.

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)