2006 Peugeot 107

Brake lever has insufficient reserve travel (1.1.2 (a))

Emissions unable to be completed unable to emission test due to exhaust gases leak (8.2.1.2 (d))

Horn not working (7.7 (a))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis section badly holed (6.1.1 (c) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis section badly holed (6.1.1 (c) (i))

Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting underbody sill holed (6.2.2 (d) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Nail in tyre ()

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

rear exhaust box tail pipe badly corroded

Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Nail in tyre ()

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

rear exhaust box tail pipe badly corroded

surface rust on n/s rear brake pipe

tail pipe on rear exhaust box corroded and holed

Brake lever has insufficient reserve travel (1.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake inoperative on one side (1.4.1 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

surface rust on n/s rear brake pipe

tail pipe on rear exhaust box corroded and holed

Emissions not tested (8.2.1.2 (d))

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Emissions not tested (8.2.1.2 (d))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

rear exhaust touching bike bracket

Nearside Rear Position lamp not working (4.2.1 (a))

Nearside Front Valve stem seriously misaligned (5.2.3 (j))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear wheel bearing has slight play (2.6.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

correct plates fitted for test

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)