2008 Toyota Aygo

Brake performance not tested (1.2.1 (g))

Brake performance not tested excessive bind n/s/r & o/s/f (1.2.1 (g))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))

Central Rear Brake pipe corroded, covered in grease or other material front to rear pipe (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle 50% o/s low (1.2.1 (b) (i))

Front Brakes imbalanced across an axle by more than 50% 52% n/s low (1.2.1 (b) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits TOO LEAN (8.2.1.2 (c))

Indicator switch inoperative (4.4.2 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Brake pipe corroded, covered in grease or other material brake pipes greased (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Exhaust has a major leak of exhaust gases back box (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Position lamp not working (4.2.1 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Front Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)