2008 Honda CBF600

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Central Front Headlamp aim too high (4.1.2 (a))

Central Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))

Central Headlamp aim too low (4.1.2 (a))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate slightly loose (0.1 (a))

Steering headbearing slightly stiff or notchy Centering slightly (2.2.2 (f) (i))

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust noisy (8.1.1 (a))

Registration plate slightly loose (0.1 (a))

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly rough. (2.2.1b)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear wheel bearings have excessive free play (2.4.A.2c) DANGEROUS

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly rough. (2.2.1b)

Headlamp aim too low (1.6)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Steering headbearing has excessive free play (2.2.2)

Drive chain excessively loose (6.2.1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))