2003 Jaguar S-type

general surface corrosion

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Coolant leak ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Tyre fouling a part of the vehicle (5.2.3 (f))

Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front wiper blade split

Offside Front wiper wheel box worn

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front wiper blade split

Offside Front wiper wheel box worn

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Brake servo corroded but not excessively weakened (3.6.A.2b)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Brake servo corroded but not excessively weakened (3.6.A.2b)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit outer edge and side wall perished (4.1.E.1)

offside wiper blade split

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

front tyres have slightly worn edges

offside rear tyre has a slightly worn edge

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Under-trays fitted obscuring some underside components

Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too low (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

offside front tyre worn on inner edge

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

offside front tyre worn on inner edge

plastic sill, under body and under engine covers fitted

slight noise from offside rear road wheel when rotated

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Anti reflective coating has been applied to rear number plate