2002 Lexus IS200

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Wheel bearing slightly noisy both (5.1.3 (b) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component corroded but not seriously weakened suspension parts corroded (5.3.3 (b) (i))

Front Wheel bearing slightly noisy both (5.1.3 (b) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component corroded but not seriously weakened suspension parts corroded (5.3.3 (b) (i))

Front Bumper insecure (6.1.4 (a) (i))

Front Headlamp aim projected beam image is obviously incorrect both headlamps (4.1.2 (c))

Front Headlamp light source and lamp not compatible both front headlamps (4.1.4 (c))

Horn not working (7.7 (a))

Front Position lamp incorrect colour both front sidelights (4.2.3 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced just outside of 30cm zone of shock absorber mounting (6.1.1 (c) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear both number plate bulbs incorrect colour

Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Position lamp incorrect colour (4.2.3 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Emissions unable to be completed due to excessive exhaust blow (8.2.1.2 (d))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Front Tyre(s) with different aspect ratios are fitted on the same axle. (5.2.3 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Tyre(s) with different aspect ratios are fitted on the same axle. (5.2.3 (b))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Position lamp incorrect colour (4.2.3 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Driver's airbag missing (7.1.5 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Horn not working (7.7 (a))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Sub-frame attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Sub-frame attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Advanced corrosion on n/s inner and outer sills

Advanced corrosion on o/s inner sill

Exhaust noisy Non-Standard exhaust fitted (8.1.1 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

o/s/f tyre wearing on inner edge

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

corrosion to underside

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

offside rear wheel shightly binding

Offside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)