2002 Mercedes-benz Ml

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Front Position lamp not working Side (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Brake pipe slightly corroded various (3.6.B.2c)

offside parking brake poor

tyres showing signs of perishing

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Brake pipe slightly corroded two pipes (3.6.B.2c)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Front suspension has slight play in an outer ball joint (2.5.B.2a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brakes imbalanced across an axle (3.7.B.5b)

Front registration plate insecure (6.3.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front rear brake binding (3.7.B.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Windscreen washer provides insufficient washer liquid (8.2.3)

O/S/F outer brake pad very low / wires broken / Fault?

Play in O/S/F outer anti roll bar bush

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

n/s/f brake pad warning light wire not conected to pad

Nearside Rear Seat belt has a cut which has significantly weakened the webbing (5.2.2a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

n/s/f brake pad warning light wire not conected to pad

rear diff oil leak

warning light wire not conected to pad

Windscreen washer provides insufficient washer liquid (8.2.3)

rear diff oil leak

warning light wire not conected to pad

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

DEEP CUT IN N/S/F TYRE

FRONT TYRES BALD ON INNER EDGE

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Offside Rear Anti-roll bar linkage insecure (2.4.G.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

DEEP CUT IN N/S/F TYRE

FRONT TYRES BALD ON INNER EDGE

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Nearside Registration plate lamp not working (1.1.5c)

Offside Rear Anti-roll bar attachment bracket/mounting bolt missing (2.4.G.1)