2002 Mazda MX-5

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Headlamp has a product on the lens but not seriously reducing light output Both Sides (4.1.4 (b))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Exhaust has a minor leak of exhaust gases BackBox (6.1.2 (a))

Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Headlamp has a product on the lens but not seriously reducing light output Both sides (4.1.4 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame corroded but not seriously weakened Front and Rear (5.3.3 (b) (i))

Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Headlamp has a product on the lens but not seriously reducing light output Both sides (4.1.4 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))

Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin BOTH SIDES (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened BOTH SIDES (5.3.3 (b) (i))

Rear Suspension arm mounting modified but not seriously weakened BOTH SIDES (5.3.3 (c) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement BOTH SIDES (5.3.4 (a) (i))

Rear Brake disc in such a condition that it is seriously weakened BOTH (1.1.14 (a) (ii)) DANGEROUS

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin BOTH SIDES (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened BOTH SIDES (5.3.3 (b) (i))

Rear Suspension arm mounting modified but not seriously weakened BOTH SIDES (5.3.3 (c) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement BOTH SIDES (5.3.4 (a) (i))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Headlamp aim too low both (4.1.2 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Headlamp aim too low both (4.1.2 (a))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

front/rear wishbones very rusty

exhaust corroded

suspension bushes perished

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

exhaust corroded

suspension bushes perished

both front tyres badly cracking in side wall & tread

both rear tyres heavily splitting in tread

corrosion o o/s outer sill

exhaust system corroded

heavy corrosion o various steering & suspension components

high level brake light in-op

perishing & cracking to various steering & suspension components

Front Brake pad(s) wearing thin (3.5.1g)

All tyres showing signs of deterioration due to age

Brake pad(s) wearing thin (3.5.1g)

All tyres showing signs of deterioration due to age

Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high (1.8)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

slight surface corrosion on front brake discs/slight fluctuation on brake roller test,advise only.