2003 Mercedes-benz Vito

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive both sills covered in underseal (5.3.6 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive both sills covered in underseal (5.3.6 (a) (i))

Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill corroded (6.1.1 (c) (i))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill corroded (6.1.1 (c) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill corroded (6.1.1 (c) (i))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill corroded (6.1.1 (c) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension component mounting repair covered in underseal Front and rear (5.3.6 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated small hole (6.1.7 (g) (i))

Nearside Front Inner Tyre slightly damaged side wall (5.2.3 (d) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Outer sill corroded

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Outer sill corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Outer sill corroded

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Side repeater slightly discoloured (4.4.3 (a))

Offside Outer sill corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing near suspension mounting (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing near top suspension mounting (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing near suspension mounting (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Tyre worn close to the legal limit Both on 3mm (4.1.E.1)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear suspension component mount under sealed

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear suspension component mount under sealed

Offside Rear tyre has a speed rating of T normal speed rating should be H

Offside Side repeater slightly discoloured (1.4.A.2f)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Top mount area under bonnet (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Top mount area under bonnet (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear fog lamp has less than 50% of the light sources illuminating (1.3.2b)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Top mount area under bonnet (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Top mount area under bonnet (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement arm rear bush (2.4.G.2)

Nearside Obligatory mirror obscured but not seriously affecting the rear view (8.1.2a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement arm rear bush (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement arm rear bush (2.4.G.2)

Nearside Obligatory mirror obscured but not seriously affecting the rear view (8.1.2a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement arm rear bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Non obligatory mirror damaged

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake load sensing valve seized (3.6.E.3)

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake lever has no reserve travel (3.1.6b)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)