MOT Status
ExpiredMileage
108,490 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
passenger door cannot be opened from outside the vehicle boot (6.2.B.1c)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear tyre perished.but not showing cords
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
vehicle full of corrosion
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Steering pivot point has excessive play inner steering joint (2.2.B.1g)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis on rear (6.1.A.1)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
vehicle full of corrosion
Battery insecure (1.9.1)
Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Obligatory mirror is incapable of being adjusted to provide an adequate view to the rear (8.1.2b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Rear Fuel system component insecure (7.2.1)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
boot lock in-op,boot floor wet, body damaged
exhaust deteriorated, front discs badly deteriorated
hand brake travel,steering noise,n/s drumstick ex-play
heavy surface corrosion to suspension components and within prescribed areas
n/s rear brake binding, rear tyres and valves cracking
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Fuel system component insecure (7.2.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Parking brake lever has no reserve travel (3.1.6b)
Rear passenger door cannot be opened from outside the vehicle (6.2.B.1c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Stop lamp not working (1.2.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
rear parking brake recording little or no effort (3.7.B.6a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Shock absorber has negligible damping effect (2.7.5)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RJ08 SXY is a 2008 Ford Ka in Red with a 1,297cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 50%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying RJ08 SXY, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of RJ08 SXY?
You can check the full history of RJ08 SXY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RJ08 SXY registered?
RJ08 SXY is a 2008 Ford Ka, first registered on 23 May 2008.
Is RJ08 SXY safe to buy?
The MOT history for RJ08 SXY shows 14 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RJ08 SXY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RJ08 SXY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.