2010 Mercedes-benz Vito

Brake pipe excessively damaged front to o/s rear and insecure (1.1.11 (c))

Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

NS MIRROR CASING HAS A TEMP REPAIR

NS WINDSCREEN HAS A SMALL CHIP

Suspension component mounting prescribed area is corroded but not considered excessive OSF inner wheel arch area corroded (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge NSR and OSR heavily wor on inner edges (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Fluid leak, but not excessive Coolant leak (8.4.1 (a) (i))

Nearside Rear Passenger seat(s) missing at time of test ()

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced Trailing arms both sides (5.3.3 (b) (i))

Slight corrosion along inner sills on both sides

Towball/hitch not fitted at time of test Also no electrics fitted ()

Nearside Body component damaged and likely to cause injury Mirror cover missing, exposing sharp edges (6.2.1 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn Front Bush is splitting/failing allowing excessive movement (5.3.4 (a) (i))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Seat belt not functioning as intended Seat belt currently wrapped around items next to seat so unable to check function due to this. (7.1.2 (c))

Offside Rear Service brake excessively binding Handbrake not releasing causing wheel to lock up (1.2.1 (f))

Offside Side repeater not working (4.4.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Fluid leak, but not excessive Coolant leak (8.4.1 (a) (i))

Nearside Rear Passenger seat(s) missing at time of test ()

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Front Bush has started to split allowing moderate movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced Trailing arms both sides (5.3.3 (b) (i))

Slight corrosion along inner sills on both sides

Towball/hitch not fitted at time of test Also no electrics fitted ()

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake disc worn, but not excessively both sides (1.1.14 (a) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

slight play in front joints

Direction indicator slightly discoloured both rear (1.4.A.2f)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Direction indicator slightly discoloured both rear (1.4.A.2f)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Registration plate lamp not working both (1.1.C.1d)

Engine covers fitted obscuring some components in the engine bay

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

o/s/f tyre worn outer edge

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)