2014 Yamaha Yzf

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Stop lamp emits other than a steady red light (4.3.3 (a) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Rear Drive chain slightly tight (6.1.7 (k) (i))

Rear Exhaust noisy (8.1.1 (a))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Exhaust noisy (8.1.1 (a))

Rear Exhaust noisy (8.1.1 (a))

Front Brake hose slightly chafed (1.1.12 (b) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Oil Leak

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Clutch / brake lever pivots worn, R/H handlebar slightly bent down, gear lever slightly bent, R / L front footrests slightly bent down & not fitted with rear seat / footrests. Footrests not required - without seat.

Front Brake hose slightly chafed (1.1.12 (b) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Clutch / brake lever pivots worn, R/H handlebar slightly bent down, gear lever slightly bent, R / L front footrests slightly bent down & not fitted with rear seat / footrests. Footrests not required - without seat.

Front Brake hose slightly chafed (1.1.12 (b) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

engine oil leak

front mud guard cable tie mounting near side

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp aim too high (4.1.2 (a))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

engine oil leak

front mud guard cable tie mounting near side

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Footrest missing (6.2.12 (a))

Engine oil leak.

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

front mud guard cable tie mounting near side

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)