2008 Toyota Aygo

Brake pipe corroded, covered in grease or other material Both front to rear, at rear (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both outer (5.3.4 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake pipe corroded, covered in grease or other material Both front to rear, at rear (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both outer (5.3.4 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Offside Front Tyre worn close to legal limit/worn on edge On limit (5.2.3 (e))

Brake pipe corroded, covered in grease or other material Both front to rear, at rear (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both outer (5.3.4 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake pipe corroded, covered in grease or other material Both front to rear, at rear (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both outer (5.3.4 (a) (i))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

front tyres starting to get low on tread

Nearside Front Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i))

front tyres starting to get low on tread

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brake pipe corroded, covered in grease or other material Both sides (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Brake pipe corroded, covered in grease or other material Both sides (1.1.11 (c))

Nearside Front Tyre slightly damaged/cracking or perishing Also uneven wear (5.2.3 (d) (ii))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing Also uneven wear (5.2.3 (d) (ii))

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Indicator switch inoperative (4.4.2 (a) (ii))

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside rear brake binding (3.7.B.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)