2005 Ktm 250 Exc

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake pedal insecure (1.1.2 (e) (i))

Rear reflector missing (4.8.2 (a) (ii))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Steering headbearing excessively stiff or notchy notchy (2.2.2 (f) (i))

Stop lamp light intensity significantly reduced (4.3.3 (a) (ii))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Position lamp not working (4.2.1 (a))

Stop lamp not working (4.3.1 (a) (ii))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Position lamp not working (4.2.1 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Stop lamp not working (4.3.1 (a) (ii))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Position lamp adversely affected by the operation of another lamp Stop light on instead of position light (4.2.3 (b))

Rear Stop lamp adversely affected by the operation of another lamp Position light on instead of stop light (4.3.3 (b))

Rear Wheel bearing so rough it is likely to overheat or break up Excessively tight to turn (5.1.3 (b) (ii)) DANGEROUS

Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected Spindle block is cracked and likely to fail (5.2.1 (c) (ii)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre is incorrectly seated on the wheel rim (4.1.2b)

Rear Tyre is incorrectly seated on the wheel rim (4.1.2b)

Rear Tyre is unsuitable (4.1.1)

Rear Wheel spoke excessively loose (4.2.1b)

Rear suspension bush has excessive free play (2.4.A2a(i))

Exhaust noisy (7.1.2)

Rear reflector on motorcycle missing (1.4.1)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))