2005 Iveco Daily

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole by inner wheel arch close to suspension mounting (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in outrigger also close to seatbelt mounting (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in front outrigger also close to seat belt mounting (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Exhaust has a minor leak

Front Side lights dim

Front and rear discs corroded and slight fluctuation on brake tester

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body mount/inner wheel arch (6.1.1 (c) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sills and outriggers (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body mount (6.1.1 (c) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sills, step, and outriggers (6.1.1 (c) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced bumper/crossmember (6.1.1 (c) (i))

Rear fog lamp obviously incorrectly positioned (4.5.4 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Exhaust emits black smoke during acceleration (8.2.1.2 (g))

Nearside n/s outer sill corroded not effecting structural strength

Offside Rear break binding

Offside Rear lamp cracked

rear body of vehicle corroded

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen damaged and affecting the driver's view of the road (3.2 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust emits black smoke during acceleration (8.2.1.2 (g))

Nearside n/s outer sill corroded not effecting structural strength

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Lower Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear break binding

Offside Rear lamp cracked

rear body of vehicle corroded

Offside Rear brake back plate corroded

Nearside Rear Leaf spring fractured (5.3.1 (b) (i))

Offside Rear Leaf spring fractured (5.3.1 (b) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Subframe mounting prescribed area excessively corroded significantly reducing structural strength both front sub-frame mounting panels corroded (5.3.6 (a) (i))

Offside Rear brake back plate corroded