2002 Honda Cb 600 F2-02

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit at 1.65mm in the centre (5.2.3 (e))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Rear Road spring corroded (5.3.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Brake performance unable to be tested Due to Contamination (1.2.1 (g))

Nearside Front Brake pad(s) contaminated (1.1.13 (b))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Rear Road spring corroded (5.3.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Road spring corroded (5.3.1 (b) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Steering movement slightly 'notchy' (2.2.1b)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Steering movement slightly 'notchy' (2.2.1b)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre valve stem slightly damaged (4.1.2c)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre valve stem slightly damaged (4.1.2c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly 'notchy' (2.2.1a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Horn not working (1.7.3a)

Drive chain slightly loose (6.2.1d)

Steering movement slightly 'notchy' (2.2.1a)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Steering movement slightly 'notchy' (2.2.1a)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Steering movement slightly 'notchy' (2.2.1a)

Horn not working (1.7.3a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))