MOT Status
ExpiredMileage
99,056 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Steering locking device missing (2.2.C.1g)
Fast Idle co% (emmissions) Close to Limit
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Supplementary Restraint System warning lamp does not illuminate (5.4.2)
Bonnet retaining device ineffective (8.4.2)
Nearside Headlamp aim too high (1.8)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Seat belt retracting mechanism defective (5.2.5b)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Fast Idle co% (emmissions) Close to Limit
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front registration plate delaminated but not likely to be misread (6.3.1d)
Oil leak
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
lower ball joint dust covers
Brakes imbalanced across an axle (3.7.B.5b)
Centre Stop lamp not working (1.2.1b)
Nearside Front Sub-frame corroded and seriously weakened (2.4.G.1)
Nearside Headlamp aim too high (1.8)
Offside Front Sub-frame corroded and seriously weakened (2.4.G.1)
Offside Rear Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Steering locking device missing (2.2.C.1g)
Offside Stop lamp not working (1.2.1b)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
rear brake application uneven (3.7.B.2)
Front registration plate delaminated but not likely to be misread (6.3.1d)
Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Seat belt damaged but webbing not significantly weakened (5.2.2a)
Oil leak
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Centre Stop lamp not working (1.2.1b)
Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Anti-roll bar ball joint dust cover missing (2.4.G.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Stop lamp not working (1.2.1b)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust has a major leak of exhaust gases (7.1.2)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Stop lamp not working (1.2.1b)
Rear registration plate deteriorated (6.3.1d)
Nearside Front Seat belt has a cut which has significantly weakened the webbing (5.2.2a)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Seat belt has a cut which has significantly weakened the webbing (5.2.2a)
Offside Stop lamp not working (1.2.1b)
Stop lamp not working (1.2.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.5c)
How Reliable is the Hyundai Getz?
Based on 1,126,487 MOT tests across 65,664 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RN03 MXY is a 2003 Hyundai Getz in Red with a 1,341cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 2003 Hyundai Getz models, the average MOT pass rate is 71.6% with a typical mileage of 54,116 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai Getz fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 39,049 recorded failures. If you're considering buying RN03 MXY, it's worth having these areas checked by a mechanic before committing.
The Hyundai Getz typically stays on UK roads for around 24 years. At 23 years old, this Hyundai Getz is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of RN03 MXY?
You can check the full history of RN03 MXY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RN03 MXY registered?
RN03 MXY is a 2003 Hyundai Getz, first registered on 27 June 2003.
Is RN03 MXY safe to buy?
The MOT history for RN03 MXY shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RN03 MXY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RN03 MXY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.