2006 Seat Leon

Nearside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Nail in tyre ()

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Windscreen washer not working (3.5 (a))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Exhaust mounting defective silencer (6.1.2 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Exhaust mounting defective silencer (6.1.2 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Tyre worn close to the legal limit both front wearing on inner edge (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

n/s/r tyre misshaped

Both rear tyres beginning to mishape on inner edge

Front Brake pad(s) wearing thin (3.5.1g)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Both rear tyres beginning to mishape on inner edge

Front Brake pad(s) wearing thin (3.5.1g)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Front suspension has slight deterioration of the bonding between metal and flexible material of an upper support bearing (2.5.B.3a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

advise front discs slighty worn

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)