MOT Status
ValidMileage
204,470 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Obligatory mirror slightly loose Cover (3.3 (b) (i))
Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Rear Heat shield loose
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Front Suspension arm pin or bush excessively worn of front (5.3.4 (a) (i))
Central Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Obligatory mirror slightly loose Cover (3.3 (b) (i))
Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Rear Heat shield loose
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Rear Heat shield loose
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Rear Heat shield loose
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Items removed from driver's view prior to test ()
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Items removed from driver's view prior to test ()
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords + worn on inner edge (5.2.3 (d) (i))
Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Shock absorbers has light misting of oil + corroded body (5.3.2 (b))
Anti-roll bar pin or bush worn but not resulting in excessive movement NSR + OSR (5.3.4 (a) (i))
Nearside + OffSide Rear Shock absorber casings corroded
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Anti-roll bar pin or bush worn but not resulting in excessive movement NSR + OSR (5.3.4 (a) (i))
Nearside + OffSide Rear Shock absorber casings corroded
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Anti-roll bar pin or bush worn but not resulting in excessive movement NSR + OSR (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases Central exhaust box (6.1.2 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Shock absorber casing corroded
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Anti-roll bar pin or bush worn but not resulting in excessive movement NSR + OSR (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases Central exhaust box (6.1.2 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Shock absorber casing corroded
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity (4.2.3 (b) (ii))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear shock absorber casing corroded
Offside Rear Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))
Rear Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear shock absorber casing corroded
Offside Rear Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))
Rear Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear all lights slightly masked
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Stop lamp not working (1.2.1b)
Inner Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Nearside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Inner Front Lower Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Nearside Inner Rear Lower Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Inner Front Lower Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Offside Inner Rear Lower Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Volkswagen Caddy?
Based on 2,354,923 MOT tests across 201,129 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RO08 LGJ is a 2008 Volkswagen Caddy in White with a 1,968cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2008 Volkswagen Caddy models, the average MOT pass rate is 74.2% with a typical mileage of 113,873 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Volkswagen Caddy fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 44,074 recorded failures. If you're considering buying RO08 LGJ, it's worth having these areas checked by a mechanic before committing.
The Volkswagen Caddy typically stays on UK roads for around 30 years. At 18 years old, this Volkswagen Caddy is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of RO08 LGJ?
You can check the full history of RO08 LGJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RO08 LGJ registered?
RO08 LGJ is a 2008 Volkswagen Caddy, first registered on 7 March 2008.
Is RO08 LGJ safe to buy?
The MOT history for RO08 LGJ shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RO08 LGJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RO08 LGJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.